Skip to Content

The Right People,
The Right Solutions, Right Now!

Call: 1.800.800.TATE or 410.242.8800    
Email: [email protected]
Need Parts?     Need Service?

Boiler Manufacturers

Cleaver Brooks is the leader in packaged boilers and boiler room equipment. They deliver Packaged Firetube Boilers to 1800 HP, Commercial Boilers to 12,500,000 Btu/Hr, Industrial Steam Boilers to 300,000 lbs/hr, Coates Electric Boilers, Industrial low-NOx burners, Deaerators, Boiler Feed Systems, Reverse Osmosis, Water Softeners, Chemical Feeders, Energy Conservation Oxygen Trim and Heat Recovery Equipment.

We service the following equipment:

- Firetube Boilers
- Deaerators
- Feedwater Systems
- Water Systems
- Industrial Watertube
- High Turndown Burners
- CB-Hawk
- 02 Trim Systems
- Condensing 
- Non-condensing
- Low Emission 
- Heat Recovery Steam Generators (HRSG)



CAMUS Hydronics, Ltd. is a manufacturer of an extensive line of gas fired copper tube boilers for Hydronic Heating and Hot Water Supply, with input capacities to 6MM BTUH, efficiencies to 95+% and NOx levels below 10 ppm.


We service the following equipment: 

- DynaFlame
- Smartflame
- DynaMax
- Microflame



New generation industrial burners engineered to have the highest performance and lowest emissions. Some of the top-performing burners on the market, ranging from 20 to 600 MMBTU/hr capacities for single and multi-burner boiler applications.



Shop Assembled and Field Erected Industrial Watertube Steam boilers to 300,000 pph, available in D, A and O types, Heat Recovery Steam Generators (HRSGs)

Penn Boilers   
Penn Separator Corp. a certified ASME Code Sec. VIII Div. 1 welding shop manufacturing boiler auxiliaries and pressure vessels since 1956.

Raypak BOILERS   
For over 50 years, Raypak has been the world's leading manufacturer of copper finned boilers and heaters.

Parker BOILERS   
The Parker Boiler Co. was founded in 1946 and is a world-renowned manufacturer of industrial and commercial steam boilers from 1.5 H.P. to 150 H.P. with pressures to 250 PSI capable of delivering dry steam in under 10 minutes. Manufacturing industrial and commercial direct-fired hot water boilers (available as gas, oil, propane, or combination-fired) ranging from 300,000 to 6,800,000 BTU, with operating temperatures to 400°F degrees and pressures to 300 PSI, Condensing Boilers 399,000 BTU to 5,433,000 BTU up to 180°F and 80 PSI.