Tate Engineering Systems, Inc. offers deaerators, boiler feed units, and fuel oil pumping systems manufactured by Deaerating Designs, a Division of Precision Boilers, Inc.

"TR" Tray Deaerator

• Guaranteed oxygen removal in excess of .005 cc/liter
• Guaranteed to eliminate titratable free carbon dioxide to 0
• Guaranteed to heat water to the corresponding temperature of the saturated steam contained within the vessel
• Guaranteed to deaerate at all loads from 0% to 100% of rated outlet capacity
• Capacities from 5,000#/hr. to 1,000,000#/hr
• All #304 stainless steel internal direct contact vent condenser
• All #430 stainless steel trays with riveted construction
• All #304 stainless steel tray enclosure
• 10 Minutes storage capacity minimum
• All deaerators designed for exact job conditions, no over or under sizing
• Completely packaged and ready for installation
• All vessels designed, built, and stamped in accordance with the A.S.M.E. code for 50 P.S.I.G.
  

"SPX" Spray Deaerator

• Capacities from 100#/hr. to 250,000#/hr
• Guaranteed oxygen removal in excess of .03 cc/liter
• Guaranteed to deaerate at all loads from 3% to 100% of the rated outlet capacity
• All stainless steel steam injection heater tube
• All stainless steel spray valves
• Heavy welded carbon steel tank
• 10 minutes of storage minimum
• Stainless steel recycle pump
• Self contained temperature control system
• All deaerators are custom engineered for exact job conditions, no over or under sizing
• Complete packaged and ready for installation

"BF" Boiler Feed System

• Heavy welded steel receiver
• Heavy steel frame and baseplate
• All bolted construction
• Sludge free pump suction
• Pump suction piping with all bronze suction gate valves
• All bronze double leverage makeup valve with stainless steel float
• All stainless steel bi-metal thermometer
• All bronze water gauge cock with shut off valves, 1/2'' glass and protector rods
• Magnetic contactors across the line starters, mounted in a N.E.M.A. 1 enclosure and wired to motors

Capabilities:

• Capacities: through 1,000 hp.
• Operating pressures: through 300 P.S.I.G.
• Tank capacities: 25 gallons through 5,000 gallons
• Simplex, duplex, triplex, quadruplex pumps
• Custom controls
• Horizontal, vertical and floor mounted units

"PK" Packed Column Deaerator

• Capacities from 100#/hr. to 250,000#/hr
• Guaranteed oxygen removal in excess of .005 cc/liter
• Guaranteed to eliminate titratable free carbon dioxide to 0
• Guaranteed to heat water to the corresponding temperature of the saturated steam contained within the vessel
• All vessels designed, built, and stamped in accordance with the A.S.M.E. code for 50 P.S.I.G. with a 1/16'' corrosions allowance
• Guaranteed to deaerate at all loads from 3% to 100% of the rated outlet capacity
• All stainless steel deaerator section
• All stainless steel vent condenser
• All stainless steel spray valves
• All Stainless steel packing rings
• 10 minute of storage minimum
• All deaerators are custom engineered for exact job conditions, no over or under sizing
• Completely packaged and ready for installation