|
|
|
Boilers and Accessories

|
 |
| Tate Engineering Systems, Inc. offers deaerators, boiler feed units, and fuel oil pumping systems manufactured by Deaerating Designs, a Division of Precision Boilers, Inc. |
 |
 |
"TR" Tray Deaerator
- Guaranteed oxygen removal in excess of .005 cc/liter
- Guaranteed to eliminate titratable free carbon dioxide to 0
- Guaranteed to heat water to the corresponding temperature of the saturated steam contained within the vessel
- Guaranteed to deaerate at all loads from 0% to 100% of rated outlet capacity
- Capacities from 5,000#/hr. to 1,000,000#/hr
- All #304 stainless steel internal direct contact vent condenser
- All #430 stainless steel trays with riveted construction
- All #304 stainless steel tray enclosure
- 10 Minutes storage capacity minimum
- All deaerators designed for exact job conditions, no over or under sizing
- Completely packaged and ready for installation
- All vessels designed, built, and stamped in accordance with the A.S.M.E. code for 50 P.S.I.G.
|
 |
 |
"SPX" Spray Deaerator
- Capacities from 100#/hr. to 250,000#/hr
- Guaranteed oxygen removal in excess of .03 cc/liter
- Guaranteed to deaerate at all loads from 3% to 100% of the rated outlet capacity
- All stainless steel steam injection heater tube
- All stainless steel spray valves
- Heavy welded carbon steel tank
- 10 minutes of storage minimum
- Stainless steel recycle pump
- Self contained temperature control system
- All deaerators are custom engineered for exact job conditions, no over or under sizing
- Complete packaged and ready for installation
|
 |
 |
"BF" Boiler Feed System
- Heavy welded steel receiver
- Heavy steel frame and baseplate
- All bolted construction
- Sludge free pump suction
- Pump suction piping with all bronze suction gate valves
- All bronze double leverage makeup valve with stainless steel float
- All stainless steel bi-metal thermometer
- All bronze water gauge cock with shut off valves, 1/2'' glass and protector rods
- Magnetic contactors across the line starters, mounted in a N.E.M.A. 1 enclosure and wired to motors
Capabilities:
- Capacities: through 1,000 hp
- Operating pressures: through 300 P.S.I.G.
- Tank capacities: 25 gallons through 5,000 gallons
- Simplex, duplex, triplex, quadruplex pumps
- Custom controls
- Horizontal, vertical and floor mounted units
|
 |
 |
"PK" Packed Column Deaerator
- Capacities from 100#/hr. to 250,000#/hr
- Guaranteed oxygen removal in excess of .005 cc/liter
- Guaranteed to eliminate titratable free carbon dioxide to 0
- Guaranteed to heat water to the corresponding temperature of the saturated steam contained within the vessel
- All vessels designed, built, and stamped in accordance with the A.S.M.E. code for 50 P.S.I.G. with a 1/16'' corrosions allowance
- Guaranteed to deaerate at all loads from 3% to 100% of the rated outlet capacity
- All stainless steel deaerator section
- All stainless steel vent condenser
- All stainless steel spray valves
- All Stainless steel packing rings
- 10 minute of storage minimum
- All deaerators are custom engineered for exact job conditions, no over or under sizing
- Completely packaged and ready for installation
|
 |
| |
Visit Deaerating Designs' Website |
|
|
|
|
|
|
|