|
|

Sioux Steam Cleaner Corporation
A
leading manufacturer of high-quality, heavy-duty Industrial
Pressure Washers, Steam Cleaners, Steam Generators, and Water Heaters for the concrete industry since 1939. Tate offers Sioux's full line of products.
|
|
| All-Electric Combination Steam Cleaners / Pressure Washers |
General Specs
- 2.3 - 4.0 GPM (Washer)
- 600 - 1200 PSI (Washer)
- 140° - 180° F Hot Water (Washer)
- 0.6 - 1.9 GPM (Steam)
- 100 PSI (Steam)
|
|
- 100% Electrically Heated Water
- Standard models certified to UL 1776 and CAN/CSA B140.11-M89 by ETL
- Explosion-proof models certified to UL 1203 CAN/CSA-c-22.2 No. 197-92
|
|
| Fuel-Fired Hot Water Washers with Steam Option
|
General Specs
- 2.2 - 5.3 GPM (Washer)
- 750 - 3000 PSI (Washer)
- 200° F Hot Water (Washer)
- 1.2 - 2.7 GPM (Steam)
- 225 - 800 PSI (Steam)
- 320° F Pressurized Hot Water flashing to Steam (Steam)
|
|
- Choose from Oil, LP, or Natural Gas fired
|
|
| Cold Water Pressure Washers
|
Cold water pressure washers are ideal for grounds maintenance, cleaning vehicles, plant facilities, sidewalks and conveyors. With the proper components, cold water pressure washers can be connected to your in-house hot water for an economical alternative to purchasing a hot water pressure washer. Heavy-duty construction and high-quality components ensure long lasting equipment.
|
|
|
| |
| Steam Generators |
The Sioux Steam-Flo is a perfect source of low pressure steam for a variety of commercial and industrial applications. This unit can be used in place of a conventional boiler for a variety of commercial and industrial applications. The generator produce 370-845 lbs. per hour of saturated steam in minutes. The Steam-Flo provides continuous, unlimited steam.
|
|
The unit is easy to maintain and built to last. Mountings include portable, stationary, or over-the-road trailer. The unit can be outfitted with an optional water tank and generator for completely self-contained operation. Because of its portability, the Steam-Flo is excellent for use in overflow production and outlying area.
Steam-Flo generators are often used in commercial greenhouses and nurseries. The vessel is registered with the National Board of Boiler and Pressure Vessel Inspectors, meets requirements of CSD-1 of the ASME Code, and is built to Section IV of the ASME code. Sioux has manufactured the Steam-Flo steam generator since 1939. Thousands are in operation worldwide, providing years of trouble-free service. |
|
| |
| Industrial Water Heaters |
| Sioux is a leader in providing industrial equipment for cold weather pouring of concrete. Hot water heaters are ideal for pre-cast and ready-mixed concrete applications. With a Sioux water heater, pouring can be done later in the Fall and earlier in the Spring, increasing profits. In addition, studies show that pouring with hot water (during any season) increases the quality of concrete. |
|
General Specs
- 1 - 3 Million BTU/ Hour
- Oil, LP, Natural Gas, or Combination Burners Available
- High Efficiency Three-Pass Coil Design
- Built to Section IV of ASME Code
- Registered with the National Board of Boiler and Pressure
Vessel Inspectors
|
|
|
Visit Sioux's Website
Suggestions
and comments: emailus@tate.com
|
|
| For
more information contact: |
Baltimore,
Maryland
Don Wojcik
410-242-8800
800-800-TATE
Ext. 265
|
Chesapeake, Virginia
Richard Bozarth
804-271-1250
800-225-6502
Ext. 306 |
Pennsylvania,
Northern Delaware,
New Jersey
Greg Ayers
877-267-7800
610-485-3560 (PA)
302-655-3279 (DE)
800-901-1685 (NJ,NY)
Ext. 125 |
Richmond, Virginia
Richard Bozarth
804-271-1250
800-225-6502
Ext. 306 |
Roanoke, Virginia
Richard Bozarth
804-271-1250
800-225-6502
Ext. 306 |
Salisbury,
Maryland
Ron Cantwell
410-546-3293
800-869-TATE
Ext. 15
|
Washington, D.C.
Steve Calobong
703-339-0014
800-758-TATE
Ext. 308
|
|
|